The truck shows up at 8:40, forty minutes before your first client. The driver has a pallet, a liftgate and fifteen more stops. Somewhere on that pallet is a treatment bed, a trolley and two crates of equipment you waited five weeks for. This is the moment most salon owners lose money — not at the supplier, not at customs, but standing in a parking lot signing a clipboard.
Delivery day has its own rules. Here is what the different freight services actually mean, what your shipment should look like when it lands, and the 30-minute inspection that protects you if something arrived wrong.
Why the signature matters so much
Freight claims live or die on paperwork. Once you sign a clean delivery receipt, the carrier’s record says the shipment arrived in good condition. Two days later, when you open the crate and find a cracked side panel, you are arguing against your own signature.
The fix is simple and takes ten minutes: inspect before you sign, write exceptions on the delivery receipt, and photograph everything. “Subject to inspection” is not a magic phrase on its own, but a signed note listing visible damage is.
Curbside, liftgate or inside delivery
These terms get used loosely by sellers, and the difference is who does the lifting.
| Service | What the driver does | What you do | Typical add-on |
|---|---|---|---|
| Curbside | Backs in, drops the pallet at the kerb | Move everything inside yourself | Included in most quotes |
| Liftgate | Lowers the pallet to ground level | Move from the street to the room | $50–$150 |
| Inside delivery | Brings items through the first door | Position and unpack | $150–$400 |
| White glove | Unpacks, places, removes debris | Inspect and sign | $300–$800 |
For a bed in a crate, curbside is a bad deal even when it is free. A queen-size treatment bed crate can weigh 150–250 lb and will not fit through a standard door on a pallet. If your room is up a flight of stairs, confirm that inside delivery includes stairs before the truck leaves the depot, not after.
What should actually arrive
Commercial spa equipment usually ships two ways: a wooden crate for beds and large tables, and heavy double-wall cartons for trolleys, stools and smaller items. Expect the crate to be screwed shut, not nailed, and to sit on a pallet with corner protection.
Open the top before the driver leaves if you can. You are looking for three things: whether the crate is still square (a tilted crate means it was dropped or stacked), whether there are impact marks on the corners, and whether the shrink wrap is intact. A crate that has been re-wrapped usually has a story.
The 30-minute inspection
- Count the pieces first. Match the carton count against the packing list, not against what you remember ordering.
- Photograph the pallet before you touch it. All four sides, plus one wide shot that shows the truck and the label.
- Check the crate corners and the pallet deck. Crushed corners and cracked pallet boards are your evidence if a frame is bent.
- Look for tilt and impact indicators if the shipper used them. A triggered indicator is a conversation to have before signing.
- Open the carton with the most fragile item — usually a ceramic or glass bowl, a mirror, or a control unit.
- Test the electrics within 48 hours. Plug in and run the full range once. A dead control box is a warranty claim; a dead control box after three weeks of sitting in a humid stockroom is an argument.
- Write exceptions on the receipt and ask the driver to initial them. Keep your copy.
If something is damaged
Note it on the delivery receipt, photograph the damage and the packaging, and email the supplier the same day with the photos and the tracking number. Keep the crate and packing material until the claim closes — carriers sometimes want them inspected, and throwing them out weakens your position.
Most damage is cosmetic and repairable: a scuffed panel, a bent caster bracket, a cracked bowl that can be replaced as a part. Structural damage to a welded frame is different, and that is where a supplier’s willingness to send replacement parts matters more than the original price.
Where to put it before install day
Do not park crated equipment in a damp basement or an unheated garage for a month. Vinyl and PU upholstery can pick up odour and surface bloom in humid storage, and control electronics dislike condensation. If your build-out is not finished, keep boxes in a dry room at normal room temperature and open the crate within a week to let the upholstery breathe.
How Nova ships
Nova ships factory-direct from our own production line, which is why we can offer MOQ 1 sample orders and a one-year warranty on parts. Electric equipment is CE certified and built for 110V-240V dual voltage, beds and chairs are rated to 300kg, production takes 10-15 days, and DDP door-to-door shipping to the USA typically runs 4-6 weeks with freight and customs cleared before the truck reaches you. You get one delivery window and one point of contact instead of a forwarder, a broker and a carrier.
Start with the spa equipment category to see what we build, and read the DDP shipping guide for the paperwork side of the same trip.
FAQ
Do I need a loading dock?
No, but tell your supplier what you do have. Without a dock, you need a liftgate, and a pallet that will not fit through the door needs inside delivery or unpacking at the kerb.
Can I refuse a damaged shipment?
You can refuse a shipment with obvious structural damage, but note the reason in writing and photograph it first. For minor damage, accept with exceptions and claim parts — refusing everything usually costs you more time than it saves.
How long do I have to report damage?
Carriers often set short windows, sometimes only a few days, so report anything visible within 24 hours and open every crate within the first week. Suppliers can only help inside those windows.