A client settles onto the bed, you reach across to start her facial, and your elbow hits the wall. Nine times out of ten that is a dimension problem, not a technique problem. When you are fitting out a US treatment room, the length, width and height of the bed decide how comfortable both of you are for the next hour.
Here is what really matters when you compare beauty bed dimensions, and how to pick a size that fits the room you actually have.
Three numbers do most of the work
Ignore the glossy photos for a minute. Length, width and working height are the numbers that decide whether a bed works in your space. Length has to clear your client’s height plus a little headroom for a pillow. Width has to be broad enough for shoulders but narrow enough to leave you a walkway. Height has to match your own working posture, not the client’s taste in furniture.
Standard beauty bed dimensions
| Bed type | Length | Width | Height range | Best for |
|---|---|---|---|---|
| Flat fixed-height bed | 72–75 in | 24–28 in | 26–30 in (fixed) | Quick facials, waxing, lash work |
| Hydraulic beauty bed | 72–75 in | 26–30 in | 24–33 in | Facials, massage, brow work |
| Electric 2-motor bed | 72–78 in | 26–30 in | 22–33 in | Facials with back adjustment |
| Electric 3–4 motor bed | 73–78 in | 28–32 in | 22–35 in | Full spa treatments |
| Wide comfort bed | 74–78 in | 32–36 in | 22–33 in | Larger clients, comfort-first rooms |
Most US salons end up with a bed around 72–75 in long and 26–30 in wide. That range fits a standard 8 ft x 10 ft treatment room with room to walk around it. Go wider than 32 in only if you have the floor space to spare, because every extra inch of bed width eats into your working aisle.
The number buyers forget: mattress depth
Cushion thickness on imported beds runs from 2 in to 4 in, and it changes everything about comfort. A 2 in pad feels firm and is easy to keep clean, which suits waxing and lash work. A 3 in pad is the sweet spot for facials and massage. Anything thicker than 4 in starts to swallow the height adjustment you paid for, because the padding sits above the frame and raises the working surface.
How much clearance do you need around the bed?
Leave 30–36 in on the side you work from. That is enough to stand, turn and reach a trolley without touching the bed. At the head, keep at least 24 in so you can walk behind for scalp and hairline work. If your room is tight, a narrower bed buys you more aisle than a shorter one, and a bed with lockable casters lets you push it against the wall between clients.
Match the size to the service
Lash and brow studios
A 72 in long, 26 in wide bed is plenty. You spend the whole appointment seated at the head, so height matters more than length. Look for a low minimum height so short clients can climb on unaided.
Facials and waxing
Go 73–75 in long and 28 in wide. You need a little extra width so a client can roll slightly during extractions, and a backrest that lifts 45–60 degrees for facials.
Massage and body treatments
Choose 75–78 in long and 30 in wide minimum. Long sessions need a face hole or face cradle at the head, and a 3 in pad that will not bottom out under repeated pressure.
What beauty beds cost in 2026
- Flat fixed-height bed: $300–$600 retail
- Hydraulic bed: $450–$900
- Electric 2-motor bed: $700–$1,400
- Electric 3–4 motor bed: $1,200–$2,300
Freight, assembly and any electrical work sit on top of those numbers. On a factory-direct order the bed itself drops well below the retail figures above, which is often the difference between fitting three treatment rooms and fitting two.
Before you order
Measure your doorway and stairwell first. A 75 in bed will not turn a tight corner, and that is the most common reason a delivery gets stuck. Check the load rating too: heavy-duty spa frames are built for a 300kg weight capacity, which covers every client you will realistically see. On electric models, look for CE certified motors and 110V-240V dual voltage so the bed works on standard US wiring without a converter.
Nova sells factory-direct wholesale, so you can order a single sample bed (MOQ 1) before committing to a full room. Production takes 10–15 days, and DDP door-to-door shipping to the USA runs 4–6 weeks. Every bed comes with a one-year warranty.
FAQ
What is the standard length of a beauty bed?
Most salon beds are 72–75 in long. Choose 75–78 in if you regularly treat clients over 6 ft or run long massage sessions.
Can a beauty bed fit in a small room?
Yes. A 72 in x 26 in bed with lockable casters works in a room as small as 7 ft x 8 ft, as long as you keep 30 in of working aisle on one side.
Do electric beds take up more floor space?
The footprint is almost identical to a flat bed. What grows is the height, not the length or width, so an electric bed is rarely the reason a room feels tight.
Sizing is the easy part once you have the numbers. Browse our beauty beds, then pair this guide with our breakdown of working heights for every service and our 300kg weight capacity guide.